Vertical surface mounted fan coil unit

Release date: 2024-12-19 10:03:19 Reading volume: 2721 Author: Keruite

1、 Overview:1. FP-LM vertical surface mounted fan coil unit air volume: 340-2380m3/h. It has a beaut

1、 Overview:
1. FP-LM vertical surface mounted fan coil unit air volume: 340-2380m3/h. It has a beautiful appearance, compact structure, and a thickness of only 230mm. Elegant colors enhance interior decoration. The air outlet is equipped with a grille with beautiful lines, which can convert the air outlet angle. The front decorative panel can be disassembled and assembled as a whole, making it convenient for regular maintenance and repair of the unit. The specially designed installation method of the air filter allows for easy disassembly and installation without the need for tools, making cleaning and maintenance extremely convenient.
The refrigerant water can enter and exit from the bottom or rear.
The condensate tray can be made of stainless steel material according to requirements.
2、 Overview of Vertical Surface mounted Fan Coil Unit:
The FP series fan coil unit has absorbed the high-quality and strong technology of similar products, and has completed a series of technical design improvements with high efficiency based on relevant standards and repeated trial production and testing. Therefore, it has superior performance, wide applications, complete varieties, high efficiency, few faults, and low noise. Its varieties include horizontal concealed installation, horizontal exposed installation, vertical concealed installation, vertical exposed installation, card type unit and other series. After being matched with fresh air units, it is widely used in low-noise places such as hotels, hospitals, office rooms, conference halls, exhibition halls, etc. It is an ideal end installation for centralized air conditioning systems.
3、 Key points for selecting exposed vertical fan coil units:
1. The main control parameters for the selection of vertical surface mounted fan coil units include rated air volume, outlet static pressure, input power, rated cooling capacity, rated heating capacity, noise, water resistance, etc.
2. The vertical surface mounted fan coil unit has a supply air volume of approximately 250-2500m/h and an outlet static pressure of less than 100Pa (high static pressure type with an outlet static pressure greater than 30Pa).
3. The selection of unit specifications should be determined by factors such as room cooling and heating loads, as well as the heat to humidity ratio of the air
4. When the enthalpy of fresh air and room air parameters are equal, the fan coil unit only bears the cooling and heating loads generated by the enclosure structure and the interior of the room;
5. When the enthalpy value of the fresh air is greater or less than the enthalpy value of the room air, the fan coil unit should add or deduct some of the fresh air cooling and heating loads;
6. When the absolute humidity of the fresh air is lower than the humidity of the room air and can fully bear the room's humidity load, the fan coil unit can only bear the room's sensible heat load and should be configured according to dry conditions;
7. When the sensible heat load in the room accounts for a large proportion, the air volume of the fan coil unit should be verified through sensible heat balance calculation. Fan coil unit (horizontal surface mounted FP-WM)
4、 Key points for construction and installation of vertical exposed fan coil units:
1. A filter should be installed at the inlet of the unit's water supply. When flushing the refrigerant water system main pipe, sewage is not allowed to pass through the coil. The high point of the coil connection should be equipped with an exhaust device, and the low point should be equipped with a drainage device.
2. The condensate discharge pipe of the vertical exposed fan coil unit must have a certain slope to ensure that there is no water accumulation in the drip tray.
3. The installation of vertical exposed fan coil units can refer to the architectural standard design drawing 01K403 "Installation of Fan Coil Units".
5、 Vertical surface mounted fan coil unit execution standard:
1. Vertical surface mounted fan coil unit product standard GB/T19232-2003 "Fan coil unit"
2. GB50243-2002 "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" for vertical exposed fan coil unit engineering standard

Previous article: FP-WM horizontal surface mounted fan coil unit

Next article: Card type fan coil unit

Fan coil unit series

Vertical surface mounted fan coil unit

Column classification

Related recommendations